DIY Printed Bath Product Labels with Paper Mart

This project is in collaboration with Paper Mart. I was provided supplies to create a Valentine’s Day tutorial. All opinions are my own. My full Disclosure Policy is here.

There’s something about a suite of matching, pretty labels on all your toiletries…something high-end and chic-looking about lovely bottles all in a row. I’m a big fan of decanting product since it creates a consistent look and feel. Yet this was the first time I was using printable clear stickers in my inkjet printer…so I had a bit of a learning curve. In collaboration with Paper Mart, here’s how to make your own pretty bath product labels (for a Valentine’s Day gift or just for yourself!) with some printable adhesive sticker paper and a printer:

How to Make Your Own Valentine’s Day Printed Toiletry Bath Product Labels

You Need:

glass bottles (these are a smaller size, good for gifts)  /  bottle caps or dispenser pumps  /  scissors  /  printable clear sticker paper  /  white eraser (not pictured) Krylon Preserve It! spray (not pictured)  /  old newspapers or something to protect your surface (not pictured)
  /  label template  /  piece of plain paper (not pictured, optional)  /  tape (not pictured, optional)  /  rubbing alcohol and paper towels (not pictured)  /  small funnel (not pictured)

How To:

1. Create your labels on the computer.  I used these original templates from Creative Market, and customized them for this project. You can download the labels I created here – or use this version where you can type your own product names in Acrobat, Photoshop, or another graphics program.

2. Print out your labels on your inkjet printer. I found that my printer had A LOT of trouble feeding the clear sticker sheet through. I got past that by taping a piece of regular 8.5″ x 11″ printer paper to the back of the sticker sheet with a couple pieces of tape, and then the printer was able to grab it and feed it through. HOWEVER printing labels on an inkjet printer I found requires sealing the labels, or else the ink will run when it gets wet. More below. (You could also use this brand on a laser printer down at the print shop to get around this…or use this waterproof label paper here.)

3. I found that my inkjet had smeared the ink a little bit. I was able to clean that up with a white eraser, and scrubbing at the ink blots before the ink was completely dry.

4. At this point if you opted for printing in your inkjet printer, you will have to seal the labels so you can use the bottles in the bathroom (where they are bound to come in contact with moisture). Here is a tutorial for sealing with clear crayon, but I prefer to use Krylon Preserve It! spray. Lay the sticker paper, right side up, on some newspapers and give it a good spray according to the directions and allow to dry.

4. Cut out your labels, leaving a small amount of sticker sheet around the label edge.

5. Remove the sticker sheet backing. Clean the bottle surface with rubbing alcohol if you need to. Making sure your bottles are clean and dry, apply the labels to the front of the bottles.

6. If you purchase the dispenser pumps through Paper Mart, you’ll find they are a bit long for these bottles. Cut the straw shorter at a length that is long enough to touch the bottom of the bottle. (I made my straws long enough so they would be pushed up against the bottle bottom, and be slightly curved in order to fit.) Cut the straw on an angle, and round out the cut edges.

7. Pour your product into the bottles (you may need a small funnel) – and enjoy!

And that’s it!

These are super-cute as a gift (think a coordinating product suite, themed gift or spa basket, or even bottles for homemade body products!). Plus, they look great on the bathroom counter.

Oh, FYI – the rose petals are from here.

Happy DIY’ing – and Happy Valentine’s Day!

xo

Carly

Save