0.diy-quartz-paperweight-introphotoI LOVE me some freeform, rough-hewn, organic-looking ROCKS lying about the house as home decor (and I’ve been a rockhound for as long as I can remember!). Now it’s particularly fashionable to have some large geode chunk or quartz piece sitting on one’s desk or bookshelf (which looks extremely high-end and chic…just ask Mitchell Gold + Bob Williams). But unfortunately these large hunks of rock just cost so darn much, they’re more an investment piece than something you can just get your hands on easily. I decided to go the DIY route, and make my own version of this ubiquitous geode decor – and use it as my own freeform paperweight for my desk. Plus, it’s waaaaaay cheaper than you might think! (Especially when you have some leftover quartz from other projects, like my DIY Free People Quartz Wrapped Bangle and DIY Free People Gold-Dipped Quartz Necklace.) diy-quartz-paperweight-done4Here’s how to make your own:

Materials:

diy-quartz-paperweight-materials

polished quartz chunks (get yours from a rock shop in bulk…I got mine from Ed’s House of Gems in NE Portland)  /  plastic lid with a lip  /  Weldbond Adhesive (or other glue for rocks)  /  clear beach glass (found in the floral section at the craft store – it’s used as vase filler)  /  gold gilding liquid and brush (optional)  /  rubber bands (optional)

How To:

diy-quartz-paperweight-step11. Start by placing your beach glass pieces and favorite quartz pieces into your lid to create the base of the piece. Fit as many as you can so that they are stable on the lid. It’s best to vary the shape and size of the pieces, and mix the polished quartz in with the matte beach glass.

diy-quartz-paperweight-step2

2. Once you’re satisfied with the arrangement, pick every other piece up and carefully add some generous glue along the edges where it touches the other pieces. Some you’ll pick up, others you won’t, but in the end you want all the pieces to have glue along their touching edges. Allow the base to dry.diy-quartz-paperweight-step3 diy-quartz-paperweight-step4

3. Once the base is sturdy, spread a large amount of glue in all the crevices and gaps [the glue I chose dries clear]. Press stones into the gaps to fill out, paying attention to the overall shape and making it rough and organic-looking like a real geode would be.diy-quartz-paperweight-step5

4. Allow to dry. You may have to repeat this process a few times until you have built up the top of the piece, since each layer may get too heavy with rocks and they start sliding off before the glue has dried. Finish with a top layer mostly of quartz piece and allow to dry.

5. (not pictured) To make it look like a true rough-hewn geode piece, once dried flip the piece over and glue rocks to the bottom of the base so the base isn’t so perfectly round and the shape of the lid itself. Rubber bands can hold these pieces of rock onto the base until everything is dry.

6. (not pictured) If you so desire, you can give the bottom of the paperweight a layer of liquid gilding…I totally would have, except the lid to my gilding was fused closed and no amount of wrenching would get it off. So I decided the finished paperweight was better without the gold!!
diy-quartz-paperweight-done2

And that’s it! Even though it’s technically just glass and quartz glued together…one would be very hard-pressed to actually figure out that it wasn’t just some cool-looking rock formation. diy-quartz-paperweight-done1 diy-quartz-paperweight-done3

(P.S. – the beautiful tea roses in the vase are actually one of my favorite Joss & Main purchases! I love their faux florals; these ones are the soft-petaled super-realistic ones.) Plus, the whole project cost me a total of $12.99 ($9 for the bag of quartz, which I had already used for other DIY’s…and $3.99 for the beach glass from Michael’s). I already had the Weldbond at home!diy-quartz-paperweight-done4

That sounds like a super-bargain, no?!

Hope your office or shelf looks snazzy and lovely with this chic and cheap upgrade. Happy DIY’ing!

xo

Carly